How to allow transfers with my Windows 10 (First Edition) computer if there is no connection?

Most people don't know that the public setting for your Windows network has severe consequences for your reachability and connectivity in your local network. When public, your Windows computer behaves exactly like you’re on a public connection, like at an airport or hotel Wi-Fi. While this is a welcome feature when you're at these places, it prevents your computer from any communication with other devices in your local network which is not helpful if you are trying to transfer some photos between your mobile and your computer for example. The following steps show you how to change your network type from Public to Private on Windows 10 First Edition.

Open the Windows 10 settings app by pressing the Windows Key + i or open the settings app from the start menu

Settings app
Settings app

Click on Network & Internet and then click the appropriate subcategory on the left, depending on the type of network connection that you use. Ethernet will show you your current network connection which can be either your LAN cable connection or your Wi-Fi connection.

Network & Internet
Network & Internet

Click on the connection name on the right under Ethernet. It should be the name of your LAN or Wi-Fi network connection followed by Connected.

Advanced network settings
Advanced network settings

Set the switch Find devices and content to On to allow communication with other devices in your local network.

Find devices and content turned on
Find devices and content turned on

54 out of 87 found this article helpful
Was this article helpful? Yes | No

Go back

Need more help?