Wie nutze ich PhotoSync mit HyperDrive CloudFTP?

Wie nutze ich PhotoSync mit HyperDrive CloudFTP?

To use PhotoSync with CloudFTP, create an FTP connection with PhotoSync and use the following configuration values when you are connected to the CloudFTP device:

Server: 192.168.0.1 (default, unless you changed it)
Port: 21 (default)
Login: leave empty
Password: leave empty
Directory: leave empty

 

Activate the Option "Select before transfer" to be able to select the target directory before a transfer starts.

Figure 1. CloudFTP settings
CloudFTP settings

 

807 out of 1447 found this article helpful
Was this article helpful? Yes | No

Go back

Need more support?