How to use PhotoSync with a Verbatim Mediashare Wireless device?

How to use PhotoSync with a Verbatim Mediashare Wireless device?


To use PhotoSync with a Verbatim Mediashare Wireless device, you need to build a WebDAV connection using PhotoSync.

Connect your iOS device with the Mediashare Wireless Wi-Fi network

Figure 1. Connect to the Verbatim Mediashare Wireless Wi-Fi network
Connect to the Verbatim Mediashare Wireless Wi-Fi network

The name of the Wi-Fi network (SSID) and the password are shown on a sticker at the bottom of your device:

Figure 2. Connect to the Verbatim Mediashare Wireless Wi-Fi network
Connect to the Verbatim Mediashare Wireless Wi-Fi network

 

Enter the PhotoSync settings, choose Configure, WebDAV and add a new WebDAV connection and use the following configuration values:

 

Server: 10.10.10.254
Port: 80
Login: admin
Password: leave the password empty or use the password that you defined in the Mediashare Wireless settings
Directory: data

 

Tap Done to connect to your Mediashare Wireless device

Figure 3. Verbatim Mediashare Wireless connection settings
Verbatim Mediashare Wireless connection settings
20 out of 36 found this article helpful
Was this article helpful? Yes | No

Go back

Need more help?