Wie muss ich CA Internet Security Suite Plus konfigurieren, damit PhotoSync funktioniert?

Unfortunately CA Internet Security Suite Plus is not able to read existing firewall configurations from the Windows Firewall so you have to do the configuration for PhotoSync manually. To start the configuration please open the CA Security Center from the Start Menu, press the "My Settings" button in the top of the security center and then press the "My Internet" button (a blue globe icon on the bottom of the window) to enter the "Keep My Internet Safe" window:

Press the "Full Report" button to enter the firewall configuration.

Keep My Internet Safe

If you have not already done this, please assign a network type to the "Network Access Settings". This will be most likely a "Home Network". After doing that, please press the "Network Rules" button to start with the definition of the necessary networking rules for PhotoSync.

Network Access Settings 

You now need to create a new rule for the PhotoSync photo transfer. Enter a name for the rule (e.g. PhotoSync) and press the Start button.

Create PhotoSync rule 

In the first step of the rule wizard select "All applications", "Allow" for the access level, and "Just log any occurrences..." for the alerts. Then press the "Next" button.

Step 1 

In the second step of the rule wizard select "TCP UDP all" for protcol and port, select "Single" for the "Local Port" setting and enter 35722 in the text field right next to the "Local Port" setting. Then press the "Next" button.

Step 2 

In the third step leave everything unchanged. Just press the "Next" button.

Step 3 

In the fourth step leave everything unchanged. Just press the "Next" button.

Step 4 

In the fifth step leave everything unchanged. Just press the "Next" button.

Step 5 

In the sixth step press the "Close" button.

Step 6 

You now need to create another rule for the Apple Bonjour internet protocol that PhotoSync uses to detect the PhotoSync devices without entering a network address. Enter a name for the rule (e.g. Bonjour) and press the Start button.

Create Bonjour rule 

In the first step of the rule wizard select "Specific Application" and select "Browse" from the drop down list below the setting. A browser window will open. Please navigate to "Computer" > "Program Files (x86)" > "Bonjour" in the left tree and select the Bonjour folder, then select mDSNResponder in the right split view and press OK to select the Bonjour executable "mDNSResponder".

Step 1 - Browser 

Select "Allow" for the access level, and "Just log any occurrences..." for the alerts. Then press the "Next" button.

Step 1 

In the second step of the rule wizard select "TCP UDP all" for protcol and port, and "All" for the "Local Port" and the "Remote Port" setting. Then press the "Next" button.

Step 2 

In the third step leave everything unchanged. Just press the "Next" button.

Step 3 

In the fourth step leave everything unchanged. Just press the "Next" button.

Step 4 

In the fifth step leave everything unchanged. Just press the "Next" button.

Step 5 

In the sixth step press the "Close" button.

Step 6 

You are now finished and should have created two new rules for PhotoSync. 

Finished 

21 von 38 fanden diesen Artikel hilfreich
War dieser Artikel hilfreich? Ja | Nein

Zurück

Hilfe benötigt?