Wie nutze ich PhotoSync mit einer Seagate Wireless Plus (ab Mitte 2014)?

Wie nutze ich PhotoSync mit einer Seagate Wireless Plus (ab Mitte 2014)?


This instruction applies for all Seagate Wireless Plus drives that were produced since mid 2014. The Firmware versions of these devices start with 4.0.0.071

To use PhotoSync with a Seagate Wireless Plus drive, connect your iOS device to the Wi-Fi network of the Seagate Wireless Plus.

Create a WebDAV connection with PhotoSync and use the following configuration values:

Server: 172.25.0.1
Port: 80
Login: leave empty
Password: leave empty
Directory: /Webdav-01

 

You must use /Webdav-01 as directory to be able to access the file system of the drive.

Figure 1. Seagate Wireless Plus settings
Seagate Wireless Plus settings
18 von 32 fanden diesen Artikel hilfreich
War dieser Artikel hilfreich? Ja | Nein

Zurück

Hilfe benötigt?