Wie übertrage ich von meinem Tablet zu einem anderen Telefon/Tablet, wenn das andere Gerät nicht automatisch gefunden wird?

Wie übertrage ich von meinem Tablet zu einem anderen Telefon/Tablet, wenn das andere Gerät nicht automatisch gefunden wird?


Ensure PhotoSync is installed on both your source device and target device (iPhone, iPod, iPod Touch, Android phone/tablet).

Run PhotoSync on both your source device and target device. Attention: Ensure both target and source devices are connected to the same Wi-Fi network.

Select a picture/video folder on your source device.

Figure 1. Select album
Select album

Tap the thumbnails of the pictures and videos that you want to sync to your target iOS device. Upon tapping a red button appears. To deselect just tap again. See the next step for other syncing possibilities.

Figure 2. Select pictures
Select pictures

 

Tap the red sync button and then select your preferred action type: New, Selected, or All.

Figure 3. Select action type
Select action type

 

Select the destination of where you want to transfer to. Tap the Phone/Tablet button if you want to transfer to a phone or tablet running PhotoSync.

Figure 4. Select destination
Select destination

 

It can happen that no target device is found because some Wi-Fi routers may not support the automatic device detection that PhotoSync uses. If your Wi-Fi allows access between devices in the same Wi-Fi network you can connect to the target device by entering the internet (IP) address of the device manually. PhotoSync remembers this input and will find your device automatically the next time your try as long as the device uses the same address.

To manually enter the address of the target device please tap on the "Add device manually (IP)" link at the bottom of the device search window.

Figure 5. Select device
Select device

 

You will be presented with an input mask to enter the IP address and the port of the target device. Enter IP address and port of the target device and tap on Done to start the detection of the target device.

Figure 6. Enter IP address and port of the target device
Enter IP address and port of the target device

 

To get the IP address and port of your target device, please press the red transfer button on the target device, select the Receive section and tap on the Phone/Tablet symbol. In this example, the IP address of the target device is 192.168.56.102 and the port is 8080. With your own devices, the IP address will be very likely different.

Figure 7. Tap the red transfer button and select the receive section
Tap the red transfer button and select the receive section

 

Figure 8. Tap the Phone/Tablet symbol to see the IP address and port of the device
Tap the Phone/Tablet symbol to see the IP address and port of the device

 

The target device should now be recognized by your tablet. You can select it from the device list to start the transfer.

 

Figure 9. Select device
Select device

 

During the transfer process your device will show a transfer progress indicator that informs you about the ongoing transfer progress.

 

Figure 10. Transfer to the target device
Transfer to the target device
502 von 915 fanden diesen Artikel hilfreich
War dieser Artikel hilfreich? Ja | Nein

Zurück

Weitere Unterstützung benötigt?