Wie übertrage ich von meinem Telefon zu einem Apple Computer mit macOS, wenn der Computer nicht automatisch gefunden wird?

Wie übertrage ich von meinem Telefon zu einem Apple Computer mit macOS, wenn der Computer nicht automatisch gefunden wird?


Ensure PhotoSync is installed on both your source device and target device (Apple computer running Mac OS X). The PhotoSync client application software for your Mac is available at http://www.photosync-app.com/downloads.

Start the PhotoSync application on your Mac.

Select a picture/video folder on your source device.

Figure 1. Select album
Select album

Tap the thumbnails of the pictures and videos that you want to sync to your Mac. Upon tapping a red button appears. To deselect just tap again. See the next step for other syncing possibilities.

Figure 2. Select pictures
Select pictures

 

Tap the red sync button and then select your preferred action type: New, Selected, or All.

Figure 3. Select action type
Select action type

 

Select the destination of where you want to transfer to. Tap the Computer button if you want to transfer to a Mac.

Figure 4. Select destination
Select destination

 

It can happen that your computer is not found because some Wi-Fi routers may not support the automatic device detection that PhotoSync uses. If your Wi-Fi allows access between devices in the same Wi-Fi network you can connect to the Mac by entering the internet (IP) address of the device manually. PhotoSync remembers this input and will find your device automatically the next time your try as long as the device uses the same address.

To manually enter the address of the target computer please tap on the "Add device manually (IP)" link at the bottom of the device search window.

Figure 5. Select device
Select device

 

You will be presented with an input mask to enter the IP address and the port of the target computer.

Figure 6. Select device
Select device

 

Please click on the PhotoSync Companion icon in the menu bar on your target computer to open the application menu.

 

Figure 7. Open application menu of PhotoSync Companion
Open application menu of PhotoSync Companion

 

Select the About... menu entry and you will see all your active network interfaces listed in the About window under Network Info. In case of this example the IP address is 192.168.100.136, the port is 9000.

 

Figure 8. About window with active network interfaces
About window with active network interfaces

 

 

Now enter the IP address and port of the target computer into the manually add device mask on your phone and press done when you're ready.

The target computer should now be recognized by your iPhone. You can select it from the device list to start the transfer.

Figure 9. Select device
Select device

 

Your pictures and videos will then be transferred to the transfer directory or associated application that you defined on your Mac.

Figure 10. Transfer to the target device
Transfer to the target device

 

409 von 678 fanden diesen Artikel hilfreich
War dieser Artikel hilfreich? Ja | Nein

Zurück

Weitere Unterstützung benötigt?